single lock standing seam

Sine wave profile

What is Corrugated profile panel ?

Corrugated profile panel is a pre-formed panel with a profile in the form of a “wave”. The system belongs to the rain-screen family (wall cladding installed on a ventilated air space). This self-supporting system can easily be installed on a non-continuous supporting structure. The sine wave profiles are installed on a metal framework fixed to the supporting structure (masonry or metal structure).

The sine wave profiles provide increased freedom of choice and design through the play of light and shadow on the cladding.


Umicore Building Products' Corrugated panel system in VMZINC consists of factory formed panels. The panels are available in multiple dimensions, providing a variety of design possibilities.

PIGMENTO Brown / PIGMENTO Green / PIGMENTO Red / Natural Zinc by VMZINC 

Thickness 1 mm
Panel Maximum Dimensions 10’-0” long
On Center 29 3/8" X 9'-6"
Corrugation Dimensions 2.67” width x 7/8” height
Radius Convex R1 120” pre-fab Concave R1 120” pre-fab Convex R2 30” field Concave R2 30" field
Weight 2.00 lb per ft2 installed
Packaging 50 per crate

Characteristics of this technique:

  • A new look that redefines vernacular architecture
  • Panels can be perforated
  • Used as wall cladding
  • Used for internal and external applications


Key Advantages:
Discrete Classic and universally used metal panel design
Technicité Versatile system with an industrial look
Technicité Economical
Technicité Range of components offering a wide variety of flashing details
Technicité Easy to install
  • Corrugated profiles are manufactured in compliance with BS EN 988:1997
  • Vertical, diagonal, and horizontal installation
  • Coverage: plus or minus 1/8” (2.2 mm)
  • Flatness at maximum deflection: 5/64” on 36” (2 mm on 914 mm)
  • Curvature: 1/32” (0.8 mm)
1 Examine substrates, areas, and conditions for compliance with requirements for installation tolerances, metal wall panel supports, and other conditions affecting performance of work.
2 Verify that substrate is plumb, sound, dry, smooth, clean, sloped for drainage, and completely anchored, and that provision has been made for wall drains, flashings, and penetrations through metal wall panels.
3 Examine primary and secondary wall framing to verify whether or not purlins, angles, channels, and other structural panel support members and anchorages have been installed correctly.
4 Prepare written report, listing conditions detrimental to performance of work of this section. Submit copy of report to architect.
5 Examine roughing-in for components and systems penetrating metal wall panels to verify actual locations of penetrations relative to seam locations of metal wall panels before wall panel installation.
6 The panels engage one another by overlapping 3 1/2” and are attached with stainless steel through fasteners.
7 Install metal wall panels in orientation, sizes, and locations as indicated on the drawings.
8 Install metal wall panels plumb, level, square, true to line, and within installation tolerances.
Install metal wall panels perpendicular to girts and subgirts. Girts or Z’s can also be installed at 45° angles unless otherwise indicated.
Anchor metal wall panels and other components of the work securely in place, with provisions for thermal and structural movement. Do not use a torch field-cut metal wall panels.
Fasten metal wall panels in accordance with manufacturer’s instructions. Flash and seal metal wall panels with weather closure edges and at perimeter of openings.
Install flashing and trim as metal wall panel work proceeds. Fasten flashings and trim around openings and similar elements.
Maintain metal wall panels in clean condition during installation. Remove protective film within 90 days of installation.

Please feel free to download the zipped BIM and sketchup content using the links below : 









 Corrugated profile panel Sketchup model




For more information, please contact VMZINC.

Download 2D details: